Jump to content

Fishing The Bung Or Tash Fly


Garhan

Recommended Posts

l=http://s18.photobucket.com/user/Garhan/media/file_zps6942a4c1.jpg.html]Posted Image[/url]

Fishing the "Tash” is a method whereby a couple of buzzers are fished below the Tash or Bung fly which acts as a float and can register very subtle takes. Use a different colour Tash (Macramé Cord) in varying light conditions to make it easier to see. Sometimes fish will even take the Tash fly.
A useful pattern for suspending nymphs which also doubles as an indicator.
Posted Image[/url
Posted Image

The bung, what is it? Well the bung has been around in one form or another for a number of years, river fisherman call it Duo or klink and dink. It is in fact a floating pattern that has the capacity to hook fish, as well as acting as an indicator to register a take. It is frowned upon by many who see it as float fishing. The ethical argument aside there can be no doubt that this is a highly effective tactic, not only on small still waters but reservoirs as well. The idea is that you can fish the bung as a sacrificial fly allowing you to fish your taking patterns absolutely static.
Originally the preferred flies to fish under the bung were buzzers, but now other flies are also very popular such as Diawl Bachs, Damsels and even Blobs. The flies themselves come down to personal preference and should be changed to match the conditions. For the purpose of this piece we will assume that the taking flies are buzzers. So how do we set up a bung rig? The usual way is to have a short leader to the bung then 3’ to the first fly a further 3’ to the second fly then another 3’ to the point fly. This gives an overall leader length of around 11’.
There are of course variations to this set up in length, but the maximum length of leader to enable the angler to safely land a fish on the point fly should be no more than 12’. Any longer length of leader than this will result in the fish playing the angler rather than the other way around. Of course by explaining this, it is immediately obvious the short comings of this method. If the fish are sitting deeper than 12’, your flies will not reach them. As with all fishing, conditions and time of year will dictate when to use a particular tactic and sometimes the bung will not be appropriate. But you can modify a 15 foot fifteen pound Steelhead leader if the fish are deeper. Start with the shorter leader design and if you get no takes then change up to the longer leader to get you down to the twenty and twenty five foot mark. Once you have determined with this system the average depth of the majority of your takes, you have one of two decisions to make. One can stay with the system that is working or two you can move over to an appropriate sinking line system with three flies and fish it horizontally during the retrieve to keep all three flies in the zone.
So we have our bung and have picked the flies to fish under it, how should it be fished? Well as stated in the opening paragraph, you can simply cast the flies out (not too far as you need to see the bung) and watch the bung. As in course fishing, if it dips or moves at all you simply lift the rod and nine times out of ten you will be into a fish. This can be very effective but it is not the only way of fishing this technique. Another way is to cast as far as you can whilst still maintaining sight of the bung. After the initial cast, it is crucial that you pay particular attention during the first 10 - 15 seconds. This is when you are most likely to get a take, as the buzzers are sinking down through the water column. If you do not get the desired effect after 30 – 60 seconds, give the line four or five long draws then stop. This will bring all the taking flies up in the water column. When the retrieve is stopped again, the taking flies will drift down through the water just like the naturals do. Again pay particular attention to what should be taken as this can be the point the fish takes the fly.
Another criticism of this method is that you can only effectively fish at the depths you have placed your taking flies i.e. 3’ 6’ and 9’. This is an incorrect assumption as the bung can also be used to target fish that are feeding in the upper layers of the water column. The way this is achieved is by fishing the floating fry pattern New Zealand Style.

This means that the taking flies are attached to the bung via the bend in the hook rather than attached by a dropper. The way in which this fishes goes against the principle of fishing the flies static. The idea in this situation is to cast the flies out as far as possible and allow the flies to settle to their optimum depth. After this has been achieved, a steady figure of eight retrieve is employed. The bung causes quite a wake in the water attracting the attention of any trout in the area. Often they will swim up behind the retrieved bung and take the trailing fly. The takes can be savage so ensure that the appropriate strength of tippet is used.

Link to comment
Share on other sites

LOL, those Brits, they come up with such amusing names for their weird flies. Cute

Funny thing about the weird names, flies and techniques is that trout behave like trout no matter what part of the world you fish. And European, Czech, Polish, French and British methodology and flies and systems are so advanced over most NA techniques. Yet we seldom give it the credit it deserves, unless someone with a prominient name in the Canadian or North America industry says so. Then we jump all over it because they recommended it. Thats truly the funny part.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...